Tuesday, November 30, 2010

Funny Wedding Messages Card



The benefits we get with eco-driving are as follows:
  • average fuel savings by 15%
  • environmental improvement
  • 15% reduction in emissions of CO2 to the atmosphere
  • Reduced noise pollution.
  • Reduced risk of accidents.
  • Increased comfort of the vehicle.
  • driver stress reduction.
  • Savings in maintenance costs of vehicle braking systems, embregue, gearbox and engine.
All this without increasing the time traveling.


Did you know .....?
  • cars consume 15% of the total energy consumed in Spain
  • 29% of the country's CO2 emissions from the transport sector.
  • driving more than 20 kilometers per hour with gear, if you hit the accelerator, the vehicle consumption is zero.
  • However, at idle, consume 0.5 to 0.7 liters per hour.

Source:


Wedding Lenghas 2010 Uk

efficient driving Michelin Guide 1917, n º 10


The Michelin tire changing under pin-valve.

Tuesday, November 23, 2010

Salieri Streaming Mario

Rothenberger tools until December 31, 2010

Promotion
Rothenberger tools until December 31, 2010




download the brochure here or www.saneamador.tk

Wednesday, November 17, 2010

Basic Facts Hurricane Katrina

new Facebook page Rollback

Open new page on Facebook,

Tuesday, November 16, 2010

Monday, November 15, 2010

Can Panadol Kill Stomach Ache?

Play Detector FEBI TESTER

TESTER GET YOUR FEBI

The Febio Tester is a universal tool for checking the status of the suspension and steering of front and rear of the vehicle for up to twenty-inch wheels and vehicle up 3.5 MT, which requires no electricity or gas use, created by a professional the workshop, Bilstein febi patent is for the professional repair visualize the movement of all parts in effect real progress, something not possible with the vehicle on the lift, in addition to verifying their status, the equipment in just five minutes operaicón user with a visual demonstration.


Tuesday, November 9, 2010

Free Downlodftv Mid Night Hot.com

TAPS Panel

Using convection technology, heating panels Wall Econo-Heat generate heat mainly behind the furnace, between the panel and the wall, which generates a current that circulates heat efficiently in the room (warm air out from behind heater at a speed of 0.7 meters per second!). This means that approximately 90% of heat comes from the back of the heater, while only 10% is radiated from the front panel. convection heating is more effective than radiation heating .



Functional Enhancements:

  • New fiber cement formula: The fiber cement panels of Econo-Heat heating is now produced to a new formula that reduces moisture content.
  • New Econo-Kit: The new patented Econo-Kit ensures an easy installation and avoids stress on the plate allowing a slight movement when the hotplate is heated.
  • New adhesive: has been specially formulated glue a new, effective and no driver to connect the two panels forming the wall heater Econo-Heat, ensuring security in its application to 100%.
  • New waterproof paint: The new water resistant paint used in our panel wall heaters provides a smoother finish and elegant, allowing easy cleaning of dirt stains. It also helps to prevent outside moisture or vapor from entering the panel.
  • New connectors: The connection of the wiring harness cable with nickel-chromium resistance within the heating panel has been improved. A welding point and a rigid connectors have replaced the old method of pressing the cable set with the resistance, making the connection even more secure.
  • switch on and off the panel improved: switch on and off the panel is now conveniently located behind the heater panel wall, protruding only a little switch on the side. This gives the heater a subtle finish very pleasing to the eye. The low light switch illuminates when the heater is running, causing the heater to check the status much easier.
  • Improved appearance: heater corners are now rounded finish line with trends in interior úcltimas the heater to provide a more elegant and modern.
  • mold New user-friendly installation: polystyrene mold protects the panel inside the box now has four holes that match the holes to be drilled for mounting the plate. Use these holes as a reference and an effortless level to mark the position of the four holes on the wall.

Questions Answers:

  • HEATER WHAT IS IT?



A panel electric heater is installed on the wall.
  • WHAT MATERIAL IS MADE?
is a fiber cement board (not asbestos).
  • HOW IT WORKS
Like a central heating system, use the principle of hot air lifting or convection heating. This inexpensive form of background heating is safe and very effective.
  • WHAT EXTENT IS FINANCIAL?
is probably the most economical heater on the market. Being a very low voltage heater, uses very little electricity, as little as four incandescent bulbs!
  • HOW CAN THAT BE CASH?
It generates a constant flow of hot air rising from a large area between the heater and the wall. There is also a steady flow of direct heat radiating from the surface. These two forms of heating combined result in an efficient and economical heating system.
  • ROOM SIZE WHAT IS CAPABLE OF HEAT?
has been specifically designed to heat a room of an average size of about 3m x 4m (12m2). You can add as many heaters as you like to heat any size room or a house, creating a central heating large proportion costerendimiento.
  • DID YOU NEED IF YOU HAVE A CENTRAL HEATING SYSTEM AT HOME?
course, panel wall heater may Econo-Heat be used in combination with central heating to help save on central heating. Using the heater Econo-Heat wall at the beginning or end of winter, can generate heat in a more economic and maintain the central heating off any longer.
  • HOW MUCH DOES IT TAKE TO WARM A ROOM?
The panel takes about 15 minutes to reach maximum surface temperature and not much longer to heat the room, depending on the characteristics of it.
  • IS SAFE CHILDREN AND PETS?
Yes, the heater has no exposed elements and its surface temperature is safe.
  • WHAT IS YOUR SIZE?
The heater measures 600 x 600mm.

Installation instructions


The ECONO-KIT TM includes: 1 x bit, 4 x 4 x spiked spacers and mounting.


Use the holes you have the shield of cork, which comes with the panel as a template to mark the place where you want it. For accuracy, use a leveler. Having made the marks, and may proceed to make the holes. For best results in your unit, install it approximately 15 cm from the ground (more or less above the wall socket.)

separators Once inserted into the holes, place the panel on them, engaging both sides.

Finally, lock the panel with skewers, pressing firmly. (To help
can use a rubber hammer head. Be careful not to damage the panel).
PROMOTIONAL VIDEO


Wednesday, November 3, 2010

Pokemon Colosseum Hack Advance Map

Fines for not wearing a seat belt. Who pays them?

The responsibility to pay the penalty imposed is the one not wearing a belt, either the driver or other occupant.

The last general circulation regulation requires all passengers to wear seat belts in both urban and interurban roads. Are exempt from this standard drivers taxis, ambulances and police cars in city streets, if they are in service, can travel without a belt. According to law, is punishable by a fine of 90 to 300 euros to anyone who is not wearing a seat belt. It's a lack classified as "serious" and the driver in addition forfeit three points. Accompanying adults are solely responsible for not wearing it and deal with the fine that this can entail.