TAPS Panel

Using convection technology, heating panels Wall Econo-Heat generate heat mainly behind the furnace, between the panel and the wall, which generates a current that circulates heat efficiently in the room (warm air out from behind heater at a speed of 0.7 meters per second!). This means that approximately 90% of heat comes from the back of the heater, while only 10% is radiated from the front panel. convection heating is more effective than radiation heating .

Functional Enhancements:

New fiber cement formula: The fiber cement panels of Econo-Heat heating is now produced to a new formula that reduces moisture content.

New Econo-Kit: The new patented Econo-Kit ensures an easy installation and avoids stress on the plate allowing a slight movement when the hotplate is heated.

New adhesive: has been specially formulated glue a new, effective and no driver to connect the two panels forming the wall heater Econo-Heat, ensuring security in its application to 100%.

New waterproof paint: The new water resistant paint used in our panel wall heaters provides a smoother finish and elegant, allowing easy cleaning of dirt stains. It also helps to prevent outside moisture or vapor from entering the panel.

New connectors: The connection of the wiring harness cable with nickel-chromium resistance within the heating panel has been improved. A welding point and a rigid connectors have replaced the old method of pressing the cable set with the resistance, making the connection even more secure.

switch on and off the panel improved: switch on and off the panel is now conveniently located behind the heater panel wall, protruding only a little switch on the side. This gives the heater a subtle finish very pleasing to the eye. The low light switch illuminates when the heater is running, causing the heater to check the status much easier.

Improved appearance: heater corners are now rounded finish line with trends in interior úcltimas the heater to provide a more elegant and modern.

mold New user-friendly installation: polystyrene mold protects the panel inside the box now has four holes that match the holes to be drilled for mounting the plate. Use these holes as a reference and an effortless level to mark the position of the four holes on the wall.

Questions Answers:

HEATER WHAT IS IT?

A panel electric heater is installed on the wall.

WHAT MATERIAL IS MADE?

is a fiber cement board (not asbestos).

HOW IT WORKS

Like a central heating system, use the principle of hot air lifting or convection heating. This inexpensive form of background heating is safe and very effective.

WHAT EXTENT IS FINANCIAL?

is probably the most economical heater on the market. Being a very low voltage heater, uses very little electricity, as little as four incandescent bulbs!

HOW CAN THAT BE CASH?

It generates a constant flow of hot air rising from a large area between the heater and the wall. There is also a steady flow of direct heat radiating from the surface. These two forms of heating combined result in an efficient and economical heating system.

ROOM SIZE WHAT IS CAPABLE OF HEAT?

has been specifically designed to heat a room of an average size of about 3m x 4m (12m2). You can add as many heaters as you like to heat any size room or a house, creating a central heating large proportion costerendimiento.

DID YOU NEED IF YOU HAVE A CENTRAL HEATING SYSTEM AT HOME?

course, panel wall heater may Econo-Heat be used in combination with central heating to help save on central heating. Using the heater Econo-Heat wall at the beginning or end of winter, can generate heat in a more economic and maintain the central heating off any longer.

HOW MUCH DOES IT TAKE TO WARM A ROOM?

The panel takes about 15 minutes to reach maximum surface temperature and not much longer to heat the room, depending on the characteristics of it.

IS SAFE CHILDREN AND PETS?

Yes, the heater has no exposed elements and its surface temperature is safe.

WHAT IS YOUR SIZE?

The heater measures 600 x 600mm.

Installation instructions

Instructions:

The ECONO-KIT TM includes: 1 x bit, 4 x 4 x spiked spacers and mounting.

Use the holes you have the shield of cork, which comes with the panel as a template to mark the place where you want it. For accuracy, use a leveler. Having made the marks, and may proceed to make the holes. For best results in your unit, install it approximately 15 cm from the ground (more or less above the wall socket.)