Magnetic Tape Reader & Writer

How to replace a wooden floor Panel

Some of its tables wood floor damaged and needs to be replaced? If it is a lace panel on the tongue and groove, then have no problem at all. Instructions

bit

board replacement wood floor.

hammer lever

wood chisel

hammer block

First, the drilling rigs through the end of the wooden floor board to be replaced and the center of the board. Use a spade bit.

Second, divide the table length wise with a wood chisel in the middle of the holes.

Then, using a lever in the division, easily lift the board of old wood floor. If there is leftover nails them out with a hammer.

REPLACE WOOD

then cut the replacement of wood floor boards to fit tightly and place the card into the slot on the new board in the language of meeting at his side.

Finally, apply glue to the ground and use the tables in place with a hammer. Be sure to use a hammer block to protect the wood.